Check Your Hard Drives Health

Your difficult drive is the soul of your computer, and you lot may rely on it to store of import data.

If it becomes corrupted for whatsoever reason and yous haven’t performed a backup recently, there’s a chance your data could exist wiped. To lower the risk of this happening, it’southward skillful practice to proceed an eye on the wellness of your hard drive.

Go on reading to learn four different ways of doing this on Windows 10.


You can check your hard drive’due south health without booting Windows.

All computers include a Basic Input Output System (BIOS) or Unified Extensible Firmware Interface (UEFI) program that enables the operating system to connect to the computer’s firmware. Every fourth dimension you boot your computer, that software volition load initially, bootstrapping Windows and allowing you to run calculator diagnostics earlier your computer boots. This method tin be used if your computer does not boot into Windows or the difficult bulldoze is inaccessible.

The procedure to run a hard drive pre-kicking diagnostics will vary depending on the manufacturer. Therefore, you’ll need to cheque your manufacturer’due south website for instructions on accessing and running the pre-boot organization diagnostics for your PC.

In the concurrently, for an idea of how it’s done, hither’s how to access the pre-kicking organisation via Dell and Lenovo.


  1. Equally your computer is trying to kicking upwardly, go along tapping the “F12” cardinal until the boot menu displays.
  2. From the “screenHP,” select “Diagnostics.”


  1. Equally your figurer is booting, repeatedly tap the “Esc” push until yous see the boot carte.
  2. Hit the “F2” key to start “diagnosticsRefer.”
Popular:   5 Tips For Blocking Mobile Tax Scammers

Use Windows CHKDSK Tool

Windows CHKDSK, one of the built-in tools, will scan your hard drive for organisation errors and bad sectors. It checks for the health of your hard drive by highlighting any errors. As well every bit scan for issues, if possible, it will fix them and allow yous know if there is a trouble it can’t handle. Follow these steps to use the tool:

  1. Open up “Search” and type “
  2. Below “Command Prompt,” select “Run as ambassador.”
  3. Blazon “
    ” at the prompt line to run a basic scan, then press “Enter.”
  4. You can also employ “
    chkdsk /f /r
    ” to set bad sectors and recover any readable data if possible.
  5. To dismount your bulldoze, first enter “
    chkdsk /f /r /x
  6. Click hither for a complete listing of Microsoft commands using the CHKDSK tool.

Utilize WMIC

Windows Management Instrumentation Command (WMIC) is a command-line interface for performing admin tasks such as checking the health of your hard disk. Apply a Self-Monitoring, Assay and Reporting Technology (S.1000.A.R.T.) feature that enables the hard drive to automatically monitor and provide basic conclusions for your hard drive’s status solitary. You lot’ll demand to install a tertiary-party app for additional information.

How to check your hard disk status using WMIC:

  1. Press the “Windows” + “R” buttons together to open a run command window.
  2. Type “
    ” and then hit the “Enter” key.
  3. Correct-click the command prompt display, then choose “Run as administrator.”
  4. Blazon “
    ” in the control prompt window, then press “Enter.”
  5. Type “
    diskdrive go status
    ,” so press “Enter.”
  6. If the written report condition is “OK,” you take a healthy hard drive.
Popular:   Geek 101 How To Transfer Music From Itunes To Android

Utilise the HDD Manufacturer’southward App

Most hard drive manufacturers volition develop an app to monitor the hard drive’due south functioning and health. You lot can download the app via the manufacturer’s website. Follow these steps to find out who your difficult drive manufacturer is:

  1. Press the “Windows” + “R” buttons.
  2. In the run control window, type “
    ” and press “Enter” for the “Organisation Information.”
  3. Click on the plus (+) sign to expand the “Components” choice.
  4. Locate “Storage” and press the adjacent plus sign to find “Disks.”
  5. Select “Disks” to observe your hard bulldoze’s manufacturer and model.

Once you’ve confirmed the manufacturer, get to their back up page to observe the difficult drive utility.


How to Tell if At that place Is Something Wrong With My Hard Bulldoze

Usually, before your difficult drive starts to fail, you’ll receive some early warning signs. These signs may only announced a few weeks earlier your difficult drive is in real trouble. In that scenario, act fast and back up your data regularly.

Some of the common early warning signs include:

• Gradually longer boot times

• Regular organization crashes

• Regular occurrence of the blueish screen of death

• BIOS errors upon startup

• Missing files means segments are failing

• “File Explorer” takes longer to load files

Keeping an Eye on Your Hard Drive’s Health

The hard bulldoze is one of your computer’s master components. It not but stores the files you save but too contains the code needed for the operating system. Even though you tin replace information technology if it has an incurable problem, your data won’t be replaced unless yous proceed regular backups.

Popular:   Geeky Zoom Backgrounds To Make Your Meetings More Interesting

Fortunately, there are a few ways to find out how healthy your hard drive is, including asking via congenital-in tools like CHKDSK and WMIC. The manufacturer volition also take a dedicated diagnostic tool available on their website.

What else do you exercise to go on on top of your computer’s overall health? Tell us almost it in the comments section below.

Check Your Hard Drives Health